Zerocat Label  v0.1.7
General Documentation for the Zerocat Label.
Product Information ZC-X200

Dear Customer,

thank you for having purchased a ZC-X200 Free Software Laptop!

This Machine is a very special device, for it runs with free BIOS software right from power-up!

However, no system is perfect, so isn't this one. Please get familiar with your computer carefully. Please avoid modifications of your system settings without having accumulated some basic background knowledge in advance.

Note due to the original hardware setup, this machine still has the Intel Manageability Engine on board. However, its firmware update has been deleted, which should significantly improve your privacy.

Scope of Delivery

  • Laptop with Coreboot Firmware
  • Main Battery and AC Power Adapter
  • Backup of ROM in Use
  • Alternative ROM without CPU Microcode Updates

Variations to be expected. Please lookup the exact scope of delivery from the related sales page of your specific machine.

Software Setup

Basically, these machines come with the following software setup:

  • BIOS chip
    • Flash Descriptor, modified
    • Intel Manageability Engine: Proprietary Firmware deleted
    • Gigabit Ethernet (GbE) Firmware: Build from Scratch
    • Coreboot Firmware (a fairly recent build)
      • CPU microcode updates included
      • Virtual Machine Extensions (VMX)
      • customized NVRAM Option Table
      • GRUB 2.02 Bootloader as Primary Payload
      • Secondary Payloads NVRAMCUI, Coreinfo and SeaBIOS
      • Zerocat Background Image
  • Harddisk
    • Trisquel GNU/Linux-libre 64bit Operating System, Standard Installation
      • Account: trisquel
      • Password: topsecret
    • Trisquel Update applied
    • On the Desktop:
      • Backup of your ROM in action
      • Alternative ROM without CPU Microcode Updates
      • Folder “flashrom”, a clone of the flashrom project

If you need to see how your ROM image has been created, these are your options:

Boot Options

When your system boots, a first GRUB menu will pop up for two seconds. Hit any key in order to access the menu, otherwise the start of your operating system via "[g] Search GRUB2 Configuration File (Internal Disk)" will be selected automatically.


  • In order to modify your Hardware Configuration Settings, invoke secondary payload NVRAMCUI with hotkey ‘n’. Please switch off the Laptop’s RF Kill Switch beforehand to avoid freezes.
  • In order to start a Trisquel-USB-Live-Image, select "[u] Search ISOLINUX Configuration File (USB)".
  • In order to start a recent Debian-USB-Drive, select "[s] Search GRUB2 Configuration File (USB)".
  • In order to cycle through pre-flashed background images, select "[i] Cycle through Background Images". Typical images are Zerocat’s logo or a photo of the flash procedure itself. A simple black background is included as well, which might be useful if you want to enter the GRUB Console.

ROM Updates

As your machine is already running a free BIOS firmware, updates can be easily applied via the flashrom utility. An external programmer is not required unless you brick your machine by accident.

cd ~/Desktop/flashrom
sudo ./flashrom -p internal -w path/to/your/new/image.rom

In case flashrom cannot detect the onboard chip automatically, please try again with option -c "MX25L6405D".

Please be aware that you are updating your ROM image on your own responsibility!

Important Websites


The ZC-X200 Free Software Laptop is sold according to Zerocat’s General Business Conditions. Its Free Software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

You proceed at your own risk.

Please note that not all features of your hardware might be supported by the installed software.

Your Feedback

Please help us to set up a valuable reputation — don't forget to provide us with your supportive feedback! You need assistance to get started? Send a mail to: